VDSL2 (Very-High-Bit-Rate Digital Subscriber Line 2, ITU-T G.993.2 Standard) is an access technology that exploits the existing infrastructure of copper wires that were originally deployed for POTS services. It can be deployed from central offices, from fibre-fed cabinets located near the customer premises, or within buildings.

ITU-T G.993.2 VDSL2 is the newest and most advanced standard of DSL broadband wireline communications. Designed to support the wide deployment of Triple Play services such as voice, video, data, high definition television (HDTV) and interactive gaming, VDSL2 enables operators and carriers to gradually, flexibly, and cost efficiently upgrade existing xDSL-infrastructure.

ITU-T G.993.2 (VDSL2) is an enhancement to G.993.1 VDSL that permits the transmission of asymmetric and symmetric (Full-Duplex) aggregate data rates up to 200 Mbit/s on twisted pairs using a bandwidth up to 30 MHz.

VDSL2 deteriorates quickly from a theoretical maximum of 200 Mbit/s (Full-Duplex) at 'source' to 100 Mbit/s at 0.3 km (symmetric).

Features

• Compliant with IEEE 802.3 & 802.3u Ethernet Standards
• Compliant with G993.2 VDSL2 standards
• Provides 4 x 10/100M auto-negotiation RJ-45 Ethernet ports
• Supports Bandwidth setup with 100 Mbps VDSL RJ-11 ports
• POTS / ISDN Splitter port RJ-11 x 1 (Splitter on board)
• Supports auto speed for VDSL2 port
• Supports rate limitation setting
• Supports noise budget setting
• Supports interleave setting
• Supports Web management (HTTP)
• Supports TFTP
• Supports PPPOE
• Supports NAT/DHCP/DMZ
• Supports Firewall
• Supports Route & Switch mode
• Supports UPnP
• Supports Loop back
• Supports SNR indicator
• Support 8a, 8b, 8c, 8d, 12a, 12b, 17a, 17b, 30a band profile
• Support 997,998 band plan
• Provides surge protection for VDSL2 port

Specifications

Standard

- IEEE802.3 standard

- IEEE802.3u standard

- Compliant G993.2 VDSL2 standards

Interface

- 4 * RJ-45 10/100Mbps Ethernet port

- 1 * RJ-11 connector for VDSL2

- 1 * RJ-11 connector for POTS / ISDN device

Switch method

- store and forward

Flow control

- Full duplex: IEEE 802.3x

- Half duplex: Back pressure

Max. Bandwidth

- symmetric 100 Mbps / 0.3 Km

Indication LED x 6

- Power LED x1

- Ethernet Link/Active LED x 4

- VDSL Link LED x 1

Console port

- RS-232C/115200bps

Band profile

-  8a, 8b, 8c, 8d, 12a, 12b, 17a, 17b, 30a

Band plan

- 997, 998

Dimension: L x W x H

- 184mm x 146mm x 40mm(7.2" x 5.74" x 1.57")

Operating temperature

-  0°C to 50°C (32 to 122F)

Operating humidity

- 10% to 90% (non-condensing)

Storage temperature

- -20 to 65°C (-4F to 149F)

AC to DC adapter

- Input range 100VAC~240VAC/50~60Hz

- Output: 12VDC/1A

Power consumption

-  7.5W

EMI Compliant:

- CE, FCC, VCCI

Chipset:

- Infineon Vinax

Ordering Information

- IP 3010L: VDSL2 CO side Bridge/Router

- IP 3010R: VDSL2 CPE side Bridge/Router