The Proscend 5000, SHDSL NTU E1 interface AC input with LCD display, offers two different ways to connect customers to high-speed TDM services with two G.703 E1 interfaces (balance 120O RJ45 jack and unbalance 75O dual BNCs). The G.703 interface will carry 64kbps to 2.048Mbps.

The SHDSL NTU can be configured and managed via EOC, or menu-driven VT100 compatible Asynchronous Terminal Interface, either locally or remotely.

Proscend 5000 is equipped with an auto rate capability that identifies the maximum line rate supported by the copper loop. This powerful automatic configuration capability makes installation and service provisioning simple and painless. Further flexibility is provided in the ability to manually set the maximum NTU speed at different levels for different customer-tailored service offerings.

Features

• Standard G.SHDSL (ITU G.991.2) supports for improved reach/speed and greater interoperability
• Fast and cost-effective provisioning of traditional frame relay (FR or T-HDLC) or TDM leased line services
• User existing copper loop infrastructures
• Can operate back to back connection
• Efficient single wire pair usage
• Up to 2.3Mbps symmetric service bit rate
• Auto rate installation maximizes data rate based on loop conditions
• Local management interface with LCD display
• Remote line loopback
• SHDSL Line performance monitoring
• Raw and per time interval statistics
• Bandwidth guarantee transmission equipment

Specifications

Network Interface

• Line Rate: SHDSL per ITU G.991.2
• Coding: Trellis coded pulse amplitude modulation
• Support: ANSI (Annex A) and ETSI (Annex B)
• Payload rates: 192kbps to 2.304Mbps N x 64kbps (N=3 to 36)
• Connection: RJ-48 jack (2-wire)

G.703 Interface

• RJ-48C for balanced 120
• BNC for unbalance 75

Framing

• G.703/G.704
• CRC 4 enable/disable
• Unframed
• Framed

DSL Timing

• Network
• Internal
• DTE

Performance Monitoring

• ES, SES, UAS, Alarms, Errors for E1, SHDSL

Loopback Tests

• Local Loopback
• Digital Loopback
• Remote Loopback
• V.54 Loopback
• Build-in 2¹¹-1 bit tester

Management

• Configuration with keypad and LCD display
• Console port
• Support firmware upgradeable

Physical/Electrical

• Dimensions: 19.5 x 4.8 x 16.8 cm
• Input: 90~240VAC with 50~60Hz
• Power Consumption:10W Max
• Operation: 0 to 50°C
• Humidity: Up to 95% (non-condensing)