Video Converter, Receiver, 1 Channel with Data(Bi-directional) & Audio, Singlemode (VCC-0112SR)
Key Features
- 8/10 bit video signal digital sampling and 24bit audio encoding
- High-speed synchronous digital transmission technology
- Modular structre design. compliant Link chassis 18 slot model VCR-1800AS and VCR-1802AD
- Support signal system PAL/NTSC/SECAM
- Super optical dynamic range, no adjustment needed
- Status indication for power supply, optical signal and video
- No electromagnetic interface, radio frequency interferency and ground current
- Safe transmission guaranteed under poor electromagnetic environment
- BNC video connector
- FC or ST optical connector
- Video DC recovery
- Maximum tolerable link loss for single mode ber is 18dB
- MTBF >100,000 hour
- Un-compressed CCTV video over fiber
- Bit error rate <1 x 10
- Included external AC adapter power supply
Specifications
Video Characteristic :
Video Channel : 1 Channel
Video impedance : BNC 75
Video voltage : 1 Vp-p
Video bandwidth : 6.5MHz ~ 8MHz
Video digital bit width : 8 bit
Differential gain : <1.3% (typical value)
SNR : >65dB
Datah Interface :
Data Channel : 1 Channel
Physical interface : Terminal Block, Screw Type
RS485 rate : DC115.2 Kbps
RS485 distance : 0-1200m
Physical protocol : RS485 (2,4Wire), Bi-Directional Manchester/Biphase protocol
Optical interface :
Physical interface : Singlemode FC/PC; Multimode ST/PC
Fiber type : Single mode, single ber; Multimode, Dual ber
Wavelength : Singlemode 1310/1550 nm; Multimode 1310 nm
Transmission distance : Singlemode 20 km; Multimode 2 km
Audio interface :
Data channel : 1 and 2(Stereo) channel
Physical interface : Terminal Block, Screw Type
Bandwidth per channel : 20Hz to 20KHz
Sampling frequency : 48KHz
Quantication grade : 24 bit
Input impedance : 47 KOhms
Output impedance : 10 KOhms
Nominal input output level : 2 Vp-p
SNR : >75dB
Total harmonic distortion : 0.1%
DataSheet