Video Converter, Receiver, 4 Channel with Data(Bi-directional), Multimode (VCC-0410MR)
Key Features
- 8 bit Video signal digital sampling
- High-speed synchronous digital transmission technology
- Modular structre design. compliant Link chassis 18 slot
- Support signal system PAL/NTSC/SECAM
- Super optical dynamic range, no adjustment needed
- Status indication for power supply, optical signal and video
- No electromagnetic interface, radio frequency interferency and ground current
- Safe transmission guaranteed under poor electromagnetic environment
- BNC video connector
- FC or ST optical connector
- Video DC recovery
- Maximum tolerable link loss for single mode ber is 18dB
- MTBF >100,000 hour
- Un-compressed CCTV video over
- Bit error rate <1 x 10
- Included external AC adapter power supply
Specifications
Video Characteristic
Video channel : 1, 2, 4 and 8 channels
Video impedance : BNC 75 Ohm
Video voltage : 1 Vp-p
Video bandwidth : 6.5MHz ~ 8MHz
Video digital bit width : 8 bit
Differential gain : <1.3% (typical value)
SNR : >65dB
Data interface
Data channel : 1 channel
Physical interface : Terminal Block, Screw Type
RS485 rate : DC-115.2 Kbps
RS485 distance : 0-1200m
Physical protocol : RS485 (2, 4Wire), Bi-Directional Manchester/Biphase protocol
Optical interface :
Physical interface : Singlemode, FC/PC; Multimode, ST/PC
Fiber type : Single mode, single ber, Multimode, Dual ber
Wavelength : Singlemode; 1310/1550 nm, Multimode; 850/1310 nm; Multimode 500 m for 2, 4, 8 Channel
DataSheet