Video Converter, Receiver, 16 Channel with Data(Bi-directional), Singlemode
Key Features
- 8/10 bit Video signal digital sampling
- High-speed synchronous digital transmission technology
- Support signal system PAL/NTSC/SECAM
- Super optical dynamic range, no adjustment needed
- Status indication for power supply, optical signal and video
- No electromagnetic interface, radio frequency interferency and ground current
- Safe transmission guaranteed under poor electromagnetic environment
- BNC video connector
- FC optical connector
- Video DC recovery
- Maximum tolerable link loss for single mode ber is 18dB
- MTBF >100,000 hour
- Un-compressed CCTV video over
- Bit error rate <1 x 10
- Included internal AC power supply
Specifications
Video characteristic
Video channel : 16 channels
Video impedance : BNC, 75 Ohm
Video voltage : 1 Vp-p
Video bandwidth : 6.5 MHz ~ 8MHz
Video digital bit width : 8 bit
Differential gain : <1.3% (typical value)
SNR : >65dB
Data interface
Data channel : 1 channel
Physical interface : Terminal Block, Screw Type
RS485 rate : DC-115.2 Kbps
RS485 distance : 0-12000m
Physical protocol : RS485 (2, 4 Wire), Bi-Directional Manchester/Biphase protocol
Optical interface
Physical interface : Singlemode, FC/PC
Fiber type : Single mode, Single Fiber
Wavelength : Singlemode, 1310/1550 nm
Transmission distance : Singlemode 20 km
Power Supply
Input Voltage : AC220V .50Hz(Included AC Power Cord)
DataSheet