ราคา และสินค้า โดย Thaiinternetwork.com

www.Thaiinternetwork.com เปิดทำการเวลา 8.30 น. - 18.00 น.(จันทร์ - ศุกร์) T.02-294-3095 F.02-294-3095 #18

Add Friend

รายการสินค้า

ผู้ผลิต


สมัครรับจดหมายข่าว

User Online

User Online: 44
Today Accessed: 2258
Total Accessed: 913636
Your IP: 3.226.243.226
Since: 15/09/2010

ข่าวสารน่าสนใจ

ไม่มี RSS feed

Syndome CLAIRE-2000 VA/1400 WATT

จ่ายกำลังไฟฟ้าสูงสูด : 2KVA / 1.4KW ช่วงแรงดันขาเข้า : 220VAC ±20% ช่วงแรงดันขาออก : 220VAC ±10% เวลาโอนย้าย (Transfer Time) :  Typical 4-10 ms


18,460.01 บาท (รวมภาษี)
17,252.34 บาท (ไม่รวมภาษี)

CLAIRE-2000

Last update: 2019-11-25 12:22:11


Features :

• Microprocessor control guarantees high reliability
• Built-in Boost and Buck AVR to stabilize the Output Voltage
• Pure Sine Wave Output
• High Frequency design with higher power density
• Green Power function to save the battery capacity with no load
• Extendable backup time with External battery Cabinet
• User Selectable Output Voltage
• User Selectable Line Sensitive
• The separated UPS and EBM design for 1.5 & 2Kva is available for different installation environment
• Smart RS-232 / USB / Dry-Contact Communication Port
• Free download software from the internet to monitor UPS status
• "Easy-to-read status indicators and easy-to-use controls with audible" alarms for critical warnings
• Overload, Short-Circuit, and Overheat Protection
• Hot Swappable / User-Replaceable battery design
• Intelligent slot allows remote monitoring, start-up or restart for
• Two In One Design, Tower & 19" Rack Mount connected equipment 750
• Seal Lead Acid Maintenance Free Battery

 

 

Type                       
Item                            Specification                                            
Model   CLAIRE-2000
Power VA/W 2000VA/1400W
INPUT   Voltage 200 +/- 20% (165-290 V ac)
Frequency Range 50 Hz ±5Hz for Normal Mode; >40Hz for Generator Mode
Surge Rating ( LV/HV ) 430 / 250 Joules
OUTPUT      Voltage 220 +/- 10%
Voltage Regulation (Batt. Mode) 220 ±5% RMS for entire battery voltage range
Frequency 50Hz
Frequency Regulation (Batt. Mode) ±0.1%
Waveform Pure Sinewave
Redundancy (Option) Hot Standby With STS technology (2 units Max)
Overload Rating  Line Mode >110%±10% alarm others input breaker protection
Batey Mode >110%±10% alarm and fault after 1min >120%+10% fault immediately
TRANSFER TIME Typical 4-10 ms
BATTERY Battery      Battery Type* Sealed Lead Acid Maintenace Free
Battery Number 12V/7Ah or 9Ah x4Unit
Backup Time (depends on computer load) 15-30 minutes
Battery Protection Battery Overcharges/Battery deep discharge/Auto self test/Fan failure protection
Recharge Time Recharge Time 4 hours to 90% after complete discharge
INDICATORS       AC Mode Line LED lighting
Backup Mode Battery LED flashing every 4 seconds
Site Fault Site Fault LED lighting ( For 120Vac Models)
Load/Battery Leve 4-segment LED bar- 0-25% : 4th LED lighting 26%-50% : 3rd and 4th LEDs lighting 51%-75% : 2nd, 3rd, and 4th LEDs lighting 76%-100% : 4 LEDs in a row all lighting
UPS Fault Fault LED Lighting
Overload OverLoad LED lighting
Low Battery Battery LED flashing every second
AUDIBLE ALARM               
    
Backup Mode Sounding every 4 seconds
Low Battery Sounding every second
UPS Fault Continuously Sounding
Overload Sounding every second
Battery Replacement Sounding every second
PHYSICAL  UPS Case
217W*86.5H*413.5D mm / 6.5(kgs)
Battery Case 217W*86.5H*413.5D mm / 12(kgs)
ENVIRONMENT  Operatione Environment 0- 40±C, 0-90 % relative humidity (non-condensing)
Noise Level Less than 45dB
INTERFACE     RS-232 Support Windows family, Linux and Mac
Dry-Contact YES
USB YES
SNMP Optional
EPO YES

 

 

- Datasheet

  • Warranty 2 Years
hp3com_480x60.jpg

รถเข็น  

ว่าง

สินค้าราคาพิเศษ

ดูทั้งหมด